Troubleshooting guide
Bluetooth Headphones Connected but No Sound on Windows 11: A Focused Fix
Category: Audio Devices
Your Windows 11 PC shows the Bluetooth headset connected, but the output device stays silent. Let’s walk through a controlled diagnosis to fix bluetooth headphones connected but no sound windows 11.
Check the active output device
Right-click the speaker icon in the taskbar and choose Sound settings. Under Output, confirm your headset is selected. If it is not listed, click Add device and pair it again. If it is listed but marked as Disabled, click it and choose Enable. Result interpretation: if the headset appears only under Input, Windows is treating it as a microphone-only device; proceed to the next check.
Verify the correct playback endpoint
In Sound settings, click your headset and open its properties. Under the Advanced tab, note the default format. If it is set to a format the headset does not support, such as 24-bit/192000 Hz, change it to 16-bit/48000 Hz and click Test. You should hear a chime from the headset. If you hear nothing, continue.
Disable exclusive mode and enhancements
On the same properties page, open the Advanced tab and uncheck Allow applications to take exclusive control of this device. Then open the Enhancements tab and check Disable all enhancements. Click Apply. This resolves cases where an app holds the audio stream silently.
Run the built-in audio test
Open Settings > System > Sound > Troubleshoot. Select your headset as the device and run the troubleshooter. If it reports that the device is not set as default, apply the fix. Then play a short local audio file. You should hear sound through the headset.
Rollback note
If audio still fails, return to Sound settings, select your previous output device, and set it as default. Then remove the headset from Bluetooth devices and pair it again. This restores your prior working state before further changes.
If these steps do not restore sound,

Ask for help with your exact device name and Windows build.